|
|
SUPERIORTM GSA Chlorinator Series CL-10/20
1000 PPD & 2000 PPD-20kg/hr & 40kg/hr
High Capacity
|
|
| |
| |
GENERAL
DESCRIPTION
The SUPERIORTM Series CL-10/20 Gas Chlorinator
is a state-of-the-art, vacuum-operated, solution feed
type, for high chlorine gas feed rates up to 2000 pounds
per 24hours(40kg/hr). The vacuum regulator is mounted
onto the chlorine valve of a wall manifold, using a very
heavy-duty,
positive yoke clamp connection. A chlorine gas flow meter
panel indicates the amount of chlorine being fed and may
be located |
| wherever it is safest and most
convenient. Chlorine flow rate is manually adjusted and
the design permits easy addition of a number of automatic
flow rate control devices. A high efficiency, water operated
ejector produces the vacuum necessary to operate the system.
A back-flow check valve system prevents pressurized water
from entering the chlorinator.A spring-opposed diaphragm
vacuum regulator controls the chlorine gas flow rate and
also acts as the safety shut-off valve. |
|
|
|
FEATURES |
THE SUPERIORTM Series CLM-10/20 presents
the most modern design technology coupled with the very best
materials available to create an outstanding, user friendly
piece of equipment. It is designed with user safety as a primary
concern.
1. A new ultra-thick, fluoroplastic yoke coating
gives SUPERIORTM corrosion resistance, won’t diffuse through
it to cause coating bubbling and peeling.
2. All molded parts are fiber-glass reinforced
ABS plastic, designed for SUPERIORTM strength, warp-resistance
and chlorine resistance.
3. All external bolts and nuts are Titanium
for complete corrosion resistance..a SUPERIORTM exclusive There
are no stainless steel or monel nuts and bolts to corrode and
freeze up in the presence of moist chlorine gas.
4. All vacuum fitting holes are heavily reinforced
to prevent the possibility of cracking from over-tightening
fittings.
5. “Y-Check” check valve design offers very
low cracking pressure and virtually no pressure drop due to
friction. Check valves are complete modules and can be closecoupled
to the ejector or located anywhere in the vacuum piping system
for maximum flexibility.
6. “Capsule” type inlet safety valve design
allows easy removal for inspection or cleaning, using no special
tools.
7. All vacuum operation, combined with modular
design of the major operating components, allows pressurized
chlorine gas to be isolated from the operating areas for greater
safety.
8. Fewer parts, combined with SUPERIOR materials
and SUPERIOR design gives you a SUPERIORTM Gas Chlorinator. |
| FLOW
METER CAPACITIES |
| SUPERIORTM’ s modular design concept allows the
chlorine gas indicating meter and flow rate control valve to
be located wherever it is most convenient for the operator,
and also in the safest location. A dual English/Metric scale
variable area flow metering tube is provided with a maximum
capacity of 1000 pounds per 24 hours-20kg/hr (Model CLM-10)
or 2000 pounds per 24 hours-40kg/hr (Model CL-20). All metering
tubes are interchangeable and may be changed in the field without
special tools. |
| MODULAR
DESIGN |
SUPERIORTM Gas Chlorinators have been
designed to give the maximum flexibility in system installation.
Each component of the chlorinator, vacuum regulator, metering
tube panel, check valve, and ejector can be placed wherever
it is safest and most convenient for operating personnel.
The regulator may be mounted on the chlorine gas manifold in
a safe storage area while the remote meter tube panel is placed
in an easily accessible place since it operates completely under
vacuum. The ejector can be located wherever plumbing and /or
hydraulic conditions make it most makes it easy and inexpensive
to expand or upgrade the system. |
| MATERIALS OF CONSTRUCTION |
| One of SUPERIOR’S major competitive
advantages is the use of the finest, strongest and most durable
materials available. Extensive use of Fluoroplastics and fiberglass
reinforced thermoplastics allow SUPERIORTM Gas Chlorinators
to withstand attack by chlorine in any form and to give the
longest operational lift. Many parts are guaranteed for the
lift of the equipment against chlorine damage. |
| SYSTEM OPERATION |
The vacuum regulator is securely clamped
onto the auxiliary chlorine valve of a chlorine gas manifold.
Water under pressure flows through the ejector at high velocity
which causes a strong vacuum to be created. This opens the check
valves in the vacuum piping between the remote meter tube/rate
valve panel and back to the vacuum regulator. When the vacuum
reaches a pre-set level, the diaphragm in the regulator moves
to open the chlorine inlet safety valve, permitting gas to flow
from the chlorine cylinder. The spring-opposed diaphragm and
inlet valve regulate the vacuum at this point.
Chlorine gas passes through the flow meter panel and rate control
valve to the ejector. The gas mixes with the ejector water and
the resulting chlorine/water solution is discharged into the
water being treated. |
|
|
| SPECIFICATIONS |
The chlorinator shall be SUPERIORTM
MODEL CL-10/20 manufactured by Chemical Injection Technologies,
Inc.,FT. Pierce, Florida, and shall have a maximum capacity
of pounds per day (gr/hr) of chlorine feed and shall be equipped
with a chlorine flow meter of pounds per day (gr/hr).
The chlorinator shall consist of modular design consisting of
a vacuum regulator, flow meter/rate valve panel, check valve
and ejector. Each of these assemblies shall be capable of being
individually located wherever safety and/or operator convenience
dictates.
The vacuum regulator shall mount directly on the auxiliary chlorine
valve of a chlorine gas wall by means of a positive yoke type
clamp having an integral tightening screw with slide bar handle.
No wrenches of other tools shall be required to mount or dismount
the vacuum regulator from the chlorine valve. The chlorine valve/chlorinator
inlet adaptor shall be inert to the effects of wet, dry or liquid
chlorine. The inlet safety shut-off/vacuum regulating valve
shall be of capsulated design, easily removable as a unit from
the outlet side of the yoke. A pressure relief valve shall be
incorporated into the vacuum regulator to prevent pressure from
building up in the system. All external screws and nuts shall
be made of Titanium to prevent corrosion.
The flow meter/rate control valve panel shall be separate from
the vacuum regulator and ejector assemblies and shall be capable
of mounting wherever it is safest and most convenient for operating
personnel.
Vacuum shall be created by a fixed-throat venture/ejector system.
A spring loaded “Y” type check valve system shall prevent water
from entering the gas system. The ejector assembly shall be
capable of withstanding water pressure up to 150 PSIG (10.2bars).
|
| STANDARD ACCESSORIES |
1-Remote vacuum regulator 10-Lead
cylinder gaskets
1-Remote metering panel 1-Vent insect screen
1-Remote Ejector Assembly 25”-3/8” vent tubing
1-Check valve assembly |
| OPTIONAL ACCESSORIES
AVAILABLE |
Inlet Water Assembly Gas Masks
Wall manifold kits Gas Detectors
Booster pumps Scales
Residual Analyzers Gauges
Automatic Controls Chlorine Comparators
Ton Container Adaptors Others Available
|
| OTHER SUPERIORTM
SYSTEMS AVAILABLE |
AUTOMATIC SWITCHOVER GAS CHLORINATORS
MULTIPLE-POINT GAS CHLORINATORS
100 POUNDS PER DAY(2000 GR/HR)
200 POUNDS PER DAY (5 KG/HR)
500 POUNDS PER DAY (10KG/HR)
GAS SULFONATORS (DECHLORINATOR)
AMMONIATORS
AUTOMATIC FLOW PROPORTIONING
AUTOMATIC RESIDUAL CONTROL |
|
